شرح أهم مشكلتين لجميع أنواع ال بي بي فايف

وهما

1. SuperDongle Repair
2. Security Test Failed
========================
المشكلة الأولى
1. SuperDongle Repair
--------------------
الجهاز يعيد تشغيل بعد فترة 3 دقائق أو أكثر ويسموها سوبر دونغل

وعند تشييك الجهاز إذا ظهر لك أحد الأخطاء التالية

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed

في هذه الحالة يجب عمل التالي

a.press repair Super Dongle

b.then SD Auth PM

c.then good pm including fields pm1 and pm309
------------------------------------------------------
أو عند تشييك الجهاز ظهرت أحد الرسائل التالية
SIMLOCK passed!
SUPERDONGLE_KEY passed!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed

فعليك عمل التالي

a.press repair Super Dongle

b.than SD Auth PM

c.than good pm including fields pm1 and pm309
==============================

المشكلة الثانية
2. Security test Failed
-----------------
عند تشييك الجهاز تظهر أحد الرسائل التالية
SIMLOCK passed!
SUPERDONGLE_KEY passed!
SIMLOCK_TEST passed
SECURITY_TEST failed

في هذ الحالة عليك عمل التالي

[size=16]a. first of all Do SX4 than PM1 and PM309

إذا لم تنجح الأولى إعمل التالي

========================
هنا أيضاً بعض الحلول
HERE THE SOLUTION FOR NOKIA 7210C CONTACT SERVICE

If after repair SD and/or Simlock (Super Dongle RPL and
Simlock RPL upload) you get "SECURITY_TEST failed!" and/or "warning: SD
authorized but verify failed!".
This is comming usually because some PM fields and/or RPL sections are missing from your phone (e.g. DRM keys, CCC, ...).

Solution 1 (easy way, maybe not work all time, depends how phone was damaged):
- write full PM from SAME phone model (product number) WITHOUT fields 1, 308, 309 (and WITHOUT field 120 for SL20 based phones)
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

if still have problems, use Solution 2:

- backup RPL (NPC, CCC, HWC, ...), will call this ORIGINAL RPL
- backup RPL from another working phone (same model) with SAME product code
- edit this good RPL from another phone and remove NPC section (all
lines who start with NPC_DATA_1 ... NPC_DATA_xx), will call this edited
file CLONE RPL
- backup full PM from another working phone (same model) with SAME product code, will call this file CLONE PM
- full erase flash chip (use erase file regarding flash chip size)
- flash phone (CMT, APE, ...)
- upload CLONE RPL
- upload ORIGINAL RPL
- write full CLONE PM without fields 1,120,308,309
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309